最近購入した
Moving Sand Art Picture Round Glass 3D 7/12inch
35.99
55.99
在庫あり
Color :
Square Yellow 5inch
Square Pink 5inch
Square Blue 5inch
Round Green 7inch
Round Black 7inch
Round Purple 7inch
Round Yellow 7inch
Round Blue 7inch
Round Pink 7inch
Square Pink 10inch
Square Blue 10inch
Square Yellow 10inch
Round Green 12inch
Round Black 12inch
Round Purple 12inch
Round Yellow 12inch
Round Blue 12inch
Round Pink 12inch
完売
詳細

Gifts for Friends, Relatives

3D sand Painting Deep, relaxing, calm

Feel the Love to everyone

User to decorate the living room, bedroom and working corner

There are 2 sizes: 7 Inches and 14 inches, specific size on the picture

 

 

 

Operation and maintenance methods

Maintenance of Quicksand Art and Controller Adjustment

1. There is no need to adjust the product after receipt! Just flip it back and forth a few times!

2. Due to changes in temperature and air pressure, you sometimes need to adjust the air and water in the quicksand paintings. The packaging of the quicksand paintings is equipped with an air regulator (syringe).

3. Specific operation: Quicksand art is the natural balance of water, sand, and air. The height of the air layer varies between 0.5cm and 2cm due to the size of the product, and the sand will have a better flow rate.

Quicksand falling too slowly: just pump out some air

1. Each quicksand painting can use an air conditioner (syringe) to adjust the air and water in the quicksand painting

2. Air conditioners (syringes) can be inserted around the square quicksand paintings, and the circular quicksand paintings will have a hole for adjustment!

3. Specific operation: gather the bubbles together (the circular quicksand painting needs to concentrate the bubbles in the hole) (make sure the sand is moved away), and then use the air regulator (syringe) to insert the air hole to extract the air!

Quicksand falling too fast: just add some air

As with the above method, gather the bubbles together (the circular quicksand painting needs to concentrate the bubbles in the hole) (make sure the sand is moved away), and then insert the air regulator (syringe) into the air hole to inject air! If many small bubbles in the quicksand painting become a very large bubble, there are two solutions:

1. Shake the quicksand painting to make the big bubbles become small bubbles.

2. You can add a little water in an appropriate amount to supplement the evaporation of water. !

Precautions for water injection in quicksand painting

1. It must be cooled with pure water or boiled water

2. As with the above method, take out some air and empty the air regulator tube (syringe tube). 3. Use the air regulator (syringe) to pump in and add a proper amount of water to prevent excessive pressure and glass breakage (too much air) It will cause excessive internal pressure in the quicksand painting, which will cause the glass to break, remember!)

    Size Guide